Tag Archives: CXBL

Planet Eclipse release CSL EGO Line – Panther, Prestige & Spekta

Planet Eclipse steps up their 2011 line of markers




ECLIPSE CSL EGO

 “Enriched with Carbon and Gold, the CSL is both striking and beautiful. From the seamless flow of the barrel and frame to the intricate detail and craftsmanship of the body. The new CSL is the epitome of class and performance with a distinctive pedigree and history that is only found in the SL mark”…

 The CSL is all about the detail. Gold screws clamp the gold-detailed grips onto the new flush fitting and screwless frame. Gold Thumbwheel and Screw on the silky smooth, bushed and re-designed C-Lever Clamping Feed. Gold LPR Torpedo and Bolt Pin. The bespoke CSL POPS system with coded gold latch pin. All co-ordinated with that lustrous carbon fibre and gold threaded weave in the all-new SL Shaft 4 Barrel Tip.

 The SL has always offered something a bit special. A bit “extra”, if you like. And this year is no exception.

 The gold accenting lifts the general appearance of the CSL into another league. All of the stainless steel parts that could be colour-coded have been, also the grip badge and body badge carry a gold chrome finish in place of the silver chrome found on the standard Ego11.

 But of course it is the new SL Shaft4 Barrel that takes the limelight. The gloss finished Carbon Fibre 14.5” and 16” tips contains a delicate gold weave, a polished gold collar, and ample porting. The backs have been stepped down a size in their range (now 0.681”, 0.685” and 0.689” bores) in order to better suit the current paint sizes around the globe. The threading and rear section use the same geometry as the Shaft4 Barrel with its increased control bore length, offering higher average velocity and improved consistency over the older Shaft SL barrels. Of course the internal bore is precision honed, as you would expect.

 In order to make the most of the stunning detailing all of the CSL the colours for this year have been designed to complement the gold theme, picking up the colour in their accented parts, but each with their own unique combination of base and contrasting elements.

 Mechanically the CSL is driven using the same solenoid with integrated Flow Control Devices as can be found on the Ego11. The Ego11 has altered perceptions on what is possible both in terms of adjustability and outright smoothness from a poppet platform. And the CSL is no different with the adjustable solenoid making it possible to dial in the marker for supreme spool valve rivalling smoothness or outright firepower at the twist of a control.

 But in other areas around the marker it’s easy to spot where those improvements that you expect to see in an SL have been made. For example the F-F or Flush Fitting Frame. Take a look and you will see that there are no longer any unsightly screw heads at the rear of the frame or inside the trigger guard. Instead, the frame is attached using a single captured free-spinning screw at the rear, and on a discrete and hidden cam-hinge at the front. The result is quicker and easier disassembly, smoother lines and improved ergonomics.

 The CSL will be shipping with the excellent Cure3+ bolt. But currently in the final stages of development we have an all-new Cure4 Bolt System. Developed with the intention to reduced stack clipping and bolt strike (where the paintball is damaged by the bolt accelerating forward and striking the stationary paintball) the new bolt includes a removable and replaceable cushioned tip. The tip is locked into position by the contoured bolt insert that is in turn held in place by the bolt pin. Complete disassembly requires no tools whatsoever. The Cure4 bolt will be made available free of charge to all CSL owners who register their marker (see inside CSL box for details).

 Continuing the long tradition of the SL range, the CSL offers a multitude of options to the owner. Electronically there is the same option of Opto or Micro trigger actuation on the board, as well as magnetic and/or spring return on the trigger. The CSL also offers the option of both a High and Low Pressure exhaust valve system which allows you tailor the efficiency and feel even further. The HP valve guide gives increased efficiency while the LP guide delivers a more gentle blast of air to the back of the ball. There is also the inclusion of the standard Ego-shaped “S” style, as well as a brand new retro “Blade”-shaped, trigger. The options included as standard with every CSL mean that there should be a set-up to suit every taste without ever the need to purchase potentially flawed aftermarket parts.

 And of course these days the options do not just stop at the hardware. Every CSL comes complete with a full E-Portal system, including software and link cables meaning that everything from the start-up splash screen to the software version can be adjusted and uploaded from a PC.

 As you can see, there is little that has been left untouched on the New CSL. And after all, The devil is in the detail, as they say…

 UNIQUE CSL FEATURES:

 Bespoke CSL Body
 Bespoke CSL F-F (Flush Fitting) Trigger Frame

 Bespoke CSL Cure4 Soft Faced Bolt With Gold Bolt Pin

 Bespoke CSL 5-Piece SL Shaft4 Shaft Barrel Kit

 Bespoke CSL Carbon Fibre Tips With Gold Weave

 Bespoke CSL Contoured dual density Grips with Gold Logo

 Bespoke CSL Gold Hardware

 Bespoke CSL Circuit Board With USB Interface – Cable and Software Included

 Bespoke CSL Dual Triggers – “Blade” and “S” Style Triggers Included

 Bespoke CSL Dual Valve Guides – HP and LP Valve Guide Kit

 Bespoke CSL Zick2 Rammer Kit

 Bespoke CSL POPS Assembly

 Bespoke CSL Smooth Clamping Feed Assembly – With Gold Sprocket Wheel

 Bespoke CSL Contoured Eye Covers

 Lazer-Eyes Red BBSS System

 Exclusive PBNation CSL Badge

 EGO11 CROSS OVER FEATURES:

 Bespoke MAC Solenoid with Adjustable Flow Controls

 Fully Adjustable Bolt and Rammer Speed for reduced Kick

 SL3 Inline Regulator With Angled Swivel

 Dual Density Rubber Console and Frame Grip

 Cure3+ Bolt

 Zick2 Rammer Shaft and Cap

 Increase Longevity of Internal Components

 New LP Supply Protection System

 92% larger transflective LCD Display

 Adjustable Tru-Colour RGB LCD Backlite

 16-Bit Microprocessor – 16 MIPS (Million Instructions Per Second)

 Improved Solenoid Drive Circuitry for increased Velocity Consistency

 New Graphical User Interface

 Ultra-Lightweight Monoform Body

 Deftek Offset Feed Tube

 Integrated Rammer Housing

 Integrated FRM

 Offset Bores

 Micro + Opto Switch Board

 Dual Instrument Grade Ball-Raced Trigger

 Dual Trigger Return Mechanisms – Magnetic and Spring Trigger

 T-Slot Rail Mounting System

 Integrated Audible Sounding Device

 LAUNCH COLOURS

 Panther, Spekta, Prestige

 WEIGHTS AND MEASURES

 Length: 540 mm

 Height: 211 mm

 Width: 31 mm

 Weight: 828g/1.82lb

 All Measurements include Barrel (14.5”), POPS, Battery, Ready-to-go:

 SL SHAFT 4 BARREL KIT SPECIFICATIONS

 1 x 14.5” Carbon Fibre Front Section 0.700” Bore

 1 x 16” Carbon Fibre Front Section 0.700” Bore

 1 x Rear Section – 0.681” Bore

 1 x Rear Section – 0.685” Bore

 1 x Rear Section – 0.689” Bore



1 Comment

Filed under Manufactures, New Markers, Paintball, Paintball News

Coming Up To Almost A Full Year Without Blog Posts

So here at ThisISPaintball.ca we decided that we would be silent for one full year from writing blog posts about paintball events, league updates, product reviews or new releases to show our concern over where the industry is heading and how the loss of the core values which paintball once held were really being throw to the side in the search for profits.

While there has not really been many of those issues disappear ThisISPaintball.ca is starting to create and share content again but will only be showcasing news from those companies which are building a healthy paintball industry and trying to showcase the local events which are really supporting true players which are keeping the industry afloat with buying & paying for their products.

Good luck to all teams & players in the 2011 season hopefully lessons can be noticed to the failures in the past few years in the paintball industry and adjustments made to make sure the sport keeps growing in the correct fashion without forgetting where the sport started off from.

Leave a comment

Filed under APBL, AXBL, Canada, CPPL, Events, Extreme Sports, Paintball, Paintball News, Sports, ThisISPaintball

JT Unveils Their 2010 Paintball Gear: Welcome The FX Concept Series

Leave a comment

Filed under ThisISPaintball

Planet Eclipse Releases The Ego Ten

Planet Eclipse Ego Ten

The Eclipse Ego10. This 6th Generation Ego is the start of a new direction for Planet Eclipse and the focus of the engineering behind the marker. For the first time since the inception of the Ego model, the Ego10’s main design brief and focus has been placed on smoothness of shot and even finer resolved paint handling. Every previous Ego has been developed with the express intent of maximizing the cycle speed of the Ego design, speeding up rammer and bolt movement and minimizing pneumatic and electronic delays wherever possible. Whist this has produced arguably the fastest under-and-over poppet paintball marker on the planet, it can equally be argued that the Ego has not been one of the smoothest shooting.

Well that is all about to change. Paintball is changing. No longer is the perfect marker the one that will shoot and cycle the fastest. Today, more than ever, players want and need to be able to shoot the most fragile paint, with the smoothest shot. And this is the direction that the Ego10 will start taking us in.

Using some of the very latest Ultra High Speed Video recording facilities, as well as micron-accurate, 50,000hz sampling speed, laser displacement sensing equipment, the Ego10 has been developed to produce bolt speeds that are more gentle on the fore-stoke so that paint is handled in a much more gentle manner when being loaded, and that opens the poppet valve in a way that helps reduce sound signature, and then returns in a way to help minimize the recoil imparted into the body by the rearward motion of the bolt and rammer and reduce rear-stop rebound.

Yet even though the cycle has been significantly slowed down, due to the unique design of the direct-mounted solenoid, the Ego10 still has extraordinary pneumatic responses that mean no time from switching on the solenoid to the bolt starting to move is wasted. The result: Still 28+bps fire rates, but smoother, quieter, better-handling feel.

With a smoother cycle, come other benefits. Wear and tear are significantly reduced. Bumpers, valves, and all other dynamic components suffer less brutal forces on every cycle hence longevity is added to each of those components.

Mechanically the Ego10 incorporates some of the technology of last season’s SL94. The Zick2, which is an intrinsic part of the pneumatic drive system, is designed to both have a softer initial kick-off on the forward stroke, which helps load the ball more gently and helps minimize bolt-strike breakage of the paintball, but also cushion the system on the return stroke into its rear-stop position. Both these attributes are key to helping achieve the fundamental goals of the Ego10.

Sitting above the Zick2 kit there is now a body-cut contoured Cure3+ bolt. The main body of the bolt carries the same upper profiling and cupping as the standard Cure3 bolt, which massively reduces both bolt-strike impact on the ball being fired, but also ensures that the bolts leading upper edge has the least amount of impact possible on the second ball in the stack. Impact fractures from the bolt on the second ball are common place when using force-feed loaders, and the Cure3 ensures those fractures are kept to an absolute minimum. But what is new on the Cure3+ bolt is a new 2-piece design. The new second piece sits inside the main body, is held in place with the bolt pin, and is removable and interchangeable without the need of any tools. The standard Cure3+ found in the Ego10 comes with a ramped insert that gives the air path from the valve to the face of the bolt a nice smooth transition through its 90 degree turn. But the real beauty of the design means that the insert can be quickly and easily removed and replaced for any future upgrades that may be developed for this bolt design.

Up at the front of the Ego10, below the lightened LPR cap, there is now an additional vent in the main body. This little vent hole is further testament of the desire to make the Ego10 the most reliable high-end marker out there. The little hole is nothing more than a vent, but its simplicity is its beauty, in that it makes it impossible for any kind of HP air from the valve chamber to bypass the internal LPR body seals and contaminate the LP air that feeds the Solenoid and Rammer. This added protection for the solenoid further enhances the durability and reliability of the whole marker.

Electronically the Ego10 has also had a complete overhaul. Of course the key features that have kept the Ego at the top of its game, such as Opto and Micro switch trigger actuation, are still there. But the heads-up display, GUI, microprocessor, solenoid drive circuit and expansion socket have all seen some major changes.

The four layer circuit board is home for a 16-bit, 16mips PIC microprocessor, running at 3V and with advanced power saving features. The increased number-crunching power of the processor allows for much more sophisticated control algorithms, leading to a smooth and seamless operation of the marker, and the 64K of internal program memory provides ample space for future firmware expansion.

The solenoid drive circuitry has been optimised with a focus upon the consistent and repeatable operation of the solenoid and multi-level prioritised interrupts within the control firmware ensure that timing fluctuations are virtually non-existent.

Standards have traditionally been a problem within paintball’s manufacturing community and so the Ego10 expansion connector supports UART, SPI and IIC interfaces, providing flexible upgrade capabilities. Planned expansion boards from Eclipse include USB and RF interfaces.

The liquid crystal display module (LCM) has been completely redesigned from scratch. This is not a commercial display, made to fit into a paintball marker but a custom unit

engineered specifically to withstand the rigours of the modern game. The chip-on-glass design is completely sealed against the ingress of paint, water and aggressive lubricants and is further protected by a plastic surround which also serves as a rigid mounting system. Transflective LCD technology means that the display doesn’t wash out in strong sunlight, contrast actually improves in brighter conditions whilst using significantly less power than OLED technology. When light levels are lower, a tru-colour RGB backlight can be configured to the user’s colour of choice via software.

The viewing area of the LCM has been increased by 92% over the previous model, improving the resolution while maintaining dot pitch and the Graphical User Interface (GUI) has been overhauled in order to take advantage of this larger viewing area. Readability has been improved with increased font sizes; Windows pop-up with useful status information; Range bars indicate the adjustability of parameters; Smart Menus reduce clutter by removing parameters when not required. Usability has been improved in a number of subtle, but important ways. It is now possible to scroll through the run screens with a single button press, allowing the user to quickly access all of the available information; The tournament lock can be quickly toggled with the press of an internal pushbutton; All of the user adjustable control parameters have been grouped into a single menu and can be easily viewed regardless of the state of the tournament lock. Along with the instant and peak ROFs the two Rate of Fire screens display historical data in the form of histograms allowing the user to monitor rate of fire consistency and thus analyse the way in which the trigger is being pulled. The Shot Counter screen features an adjustable and selectable Shots Remaining Gauge which allows the user to quickly estimate how much paint they have remaining.

All together, the changes made to the Ego10 have been entirely player-focused. It’s been designed to be easier to shoot, smoother to shoot, more reliable, more consistent, require less day-to-day maintenance, easier to adjust and just generally nicer to live with. What you won’t find different with the new Ego10 is our industry-leading levels of customer support, our commitment to support the players in the locations they use Eclipse products, and our commitment to educating and training technicians and service centres the world over.

An Eclipse Marker is more than just a collection of metal and wires. It is the Complete Package.

Weight – 903g/1.98lb Including 14″ Shaft3 Barrel, Battery, Feed Tube, OOPS
Length – 531mm Including 14″ Shaft3 Barrel
Height – 208mm
Width – 26mm

Leave a comment

Filed under ThisISPaintball

New Dye Precision Gear For 2010

DYE 2010

Leave a comment

Filed under ThisISPaintball

2009 NAX First Round Schedule

Leave a comment

Filed under ThisISPaintball

CXBL Event 5 Review

North America Xtreme Paintball League

Ground Zero Paintball pulled through with another successful paintball event once again, hosting the fifth event of the season in Gananoque, Ontario. Unbelievably, it was already here. This was the last event for your team to make the cut as the number one team in your division, the last chance at bringing home the medals, and the last shot at making NAX. We, the players, and spectators, witnessed it all. Everything from the tears and blood, to the joy and high feeling of accomplishment. It all comes in the package; hopefully you were fortunate enough to catch it all live.

Sometimes there is just too much to tell, or, you just don’t know where to kick the weekend’s story off from. So the best way to resolve this is by starting with congratulating all the teams who busted their buts this season in the trenches, and now have made it to the top. After all the hard work, dedication, money, and time put into this, they deserve one big round of applause.

CX4 team Whitby Rhino Rampage came first this season, winning the series title as the number one CX4 team in their division. They came through with a total of 225 points this season, along with Codrington Corrupted Youth in second place and Hamilton Havoc in third place. It was a tight division, packed with close matches all season long, but everybody did an amazing job. Congratulations boys, enjoy the prizes and super cool medals.

RXL team Woodstock Defiance came into the division with next to no Xball experience, other than being under the wing of Travis Kropf (ex. Shockwave Canada player). This was their first year as a real team together, gaining hundreds of war stories and hotel memories this season together as a team. They went through the drama together, and have now learned how to win together. Woodstock Defiance also accomplished their goal of winning an MXL spot in the league for next season. Congratulations on a job well done. Essex Supremacy led shortly behind in second place, as well as Joyceville Juveniles in third place. Hopefully everybody takes another shot at the title next season in 2010, where we’ll find more exciting matches and new winners.

Kitchener Recon came into MXL this season after winning their spot from RXL in 2008. They smashed their way through RXL, now absolutely obliterating anybody in their path in MXL. Recon has a point differential of plus 65, leaving the closest contender (Sudbury Union) in the dust with only plus 18. They not only blew the points off the score sheets, but also managed to win every single match, going undefeated this season. If that isn’t impressive enough, they also not only won a CXBL spot for next year, but an AXBL spot as well. Kitchener Recon competed in MXL up in the states as well, under the name of Bronx Hate. It just so happens that Bronx Hate went undefeated this season in the MXL division. This group of players definitely has something going for them, who knows what 2010 will bring. I believe I speak for them when I say thanks go out to their loyal coach Nelson Fonseca. Congrats also go out to Elmira Nemesis for coming in second place and Waterloo Wildcards for coming in third.

CXBL was an absolute, out of control, rollercoaster this season. Teams that were in the bottom seemed to somehow find their groove around the middle, and others who thought to have no worries, fell into the ground. Although, three particular teams seemed to always be in the same ball park. First up was Cambridge Raiders, the thought to be winning team this season. Next up was Kingston Criminal Factory, a team that was coming from experience, as well as the help from hired pros Bart Blonski and Pete Utschig. Finally was Toronto Rage, a well represented team who made some major pickups this season to perfect the roster. All three teams grinded out hard matches with one another, but the question remained, who would break through with the medals and move onto NAX? The answer was Toronto Rage. After Cambridge Raiders slipped last event, Toronto Rage seized all the open opportunities possible. Quick points in clutch times raised their point differential a ton, bringing them the medals and entitling them as the number one team in Central CXBL. Cambridge Raiders just fell short, coming in second. Kingston Criminal Factory remained in third with only a total of 10 points, compared to Rage and Raiders with 12. Amazing jobs everybody, but the action isn’t close to over yet. NAX is in less than a month, so I hope to see everybody there.

Special Thanks go out to all of our hosts for making this possible. Ground Zero, Flag Raiders, Soldier Gear, and Bingemans entertainment center all did a phenomenal job with the events. Special thanks also go out to BuyPBL, Draxxus, VForce, Smart Parts, Sup Air Ball, Canadian Tire, and FantasyPB for making any of this possible. The best event of the season is always saved for last; NAX is going to get hectic. The pressure is on and the teams demand 110% out of their players at this point. Stay tuned in and don’t miss a second of it with ThisIsPaintball.ca!

Kyle Muffty

3 Comments

Filed under Canada, CXBL, Events, Extreme Sports, Paintball, Paintball News, Sports, ThisISPaintball